Quote Comparison Decoder

What your floor heating quote doesn't say – and what that silence costs.

Tick what your quote actually includes, in writing. See what's missing, and what each missing item typically costs a home your size. Free, 2 minutes, modelled estimates – no salesperson, no site visit, nobody rubbishing anyone's quote.

Your quote, decoded

Floor area you want heated

The rough size of the heated area, in square metres – estimate if you're not sure.

200 m²

Which of these does your quote actually include – in writing?

Tick only what you can point to on the page. If it isn't in writing, it isn't included – "that's all standard" is a sentence, not a specification.

Your quote · 200 m² · 0 of 8 in writing

Your full report is ready.

Enter your email and it unlocks below – with the exact questions to email your installer, copy-paste ready, and the printable checklist for comparing two quotes side by side. We'll also send it to you in writing.

We'll send your report, then a few short emails from Phil on getting your heating right. Unsubscribe anytime · Privacy

Download the printable quote-comparison checklist (PDF) →

Now: how do you resolve the unticked boxes?

The Comfort Guarantee Roadmap is the engagement that resolves every unticked box before the pour – heat load calculated room by room, insulation and thermal breaks specified, the heat pump sited to breathe, and the design signed off. $1,450, 100% credited to your build.

See the Comfort Guarantee Roadmap →

Not ready for that? The Thermal Risk Scan checks your build plan for the specific risks behind these numbers – free, 2 minutes.

The questions to email your installer – copy-paste ready

Send all eight, even the ones your quote already covers – "in writing" is the point. Paste this into an email:

Before we go ahead, could you confirm the following in writing, as part of the quote:

The room-by-room heat-load calculation the design is based on – not sizing from total floor area.

The screed or under-slab insulation spec – product and rating, shown in the drawings.

The thermal break detail at the slab edge and at any alfresco, garage or pool junction.

The heat pump position, marked on the plan, with the clearances around it.

How the controls will be commissioned to the slab's actual heat-up time.

The commissioning and loop-by-loop balancing procedure, with the figures recorded.

The written performance guarantee – who owns the outcome if a room doesn't reach temperature.

The name of the engineer who signs off the design.

An installer who has done this work will answer in a day, and you should feel good about them. An installer who hasn't will go quiet, or tell you it's all standard. Either answer tells you what you're buying.

Not giving us your email? Fair enough – here's what the Comfort Guarantee Roadmap does →

Modelled estimate, not a quote or a promise. Cost figures are Euroheat engineering estimates per heating month, using the same rates as our Thermal Risk Scan – your actual impact depends on your specific home, design, and energy use. These figures exist to show the order of magnitude of what a missing item costs; they are never something we guarantee. This tool reads your ticks, not your quote – if an item is included but not written down, ask for it in writing and tick it then.